Category:

• Technology

About:

Configuring P2P Connection between MikroTik Mantabox 19s, LHG, and SXT: A Step-by-Step Guide

Welcome to our comprehensive guide on configuring a Point-to-Point (P2P) connection between MikroTik Mantabox 19s, LHG (LHG series device), and SXT (SXT series device). This step-by-step guide will help you establish a reliable and efficient wireless link between these devices. Let's get started:

1. Hardware Setup: Ensure that you have the necessary hardware components, including the MikroTik Mantabox 19s, LHG device, and SXT device. Mount the devices securely in their desired locations, keeping in mind the line-of-sight (LOS) requirements for optimal signal strength.

2. Access MikroTik RouterOS: Connect your computer to the Mantabox 19s via Ethernet cable and access the MikroTik RouterOS interface using a web browser. Enter the default IP address (usually 192.168.88.1) in the browser's address bar to access the router's configuration.

3. Configure Mantabox 19s: Set up the Mantabox 19s device by configuring basic network settings, such as IP address, subnet mask, and default gateway. Ensure that the wireless interface is enabled and properly configured.

4. LHG Configuration: Connect to the LHG device via Ethernet cable and access its configuration interface using the default IP address (usually 192.168.88.1). Configure the wireless interface to match the desired settings for the P2P link, including frequency, channel width, SSID, security settings, and authentication method.

5. SXT Configuration: Connect to the SXT device via Ethernet cable and access its configuration interface using the default IP address (usually 192.168.88.1). Configure the wireless interface to match the desired settings for the P2P link, including frequency, channel width, SSID, security settings, and authentication method. Ensure that the wireless interface is set to the same frequency and channel as the LHG device.

6. P2P Link Configuration: On the Mantabox 19s, navigate to the Wireless menu and select the Wireless link you want to configure. Set the SSID, security settings, and authentication method to match those of the LHG and SXT devices. Adjust other parameters, such as frequency and channel width, to ensure synchronization between devices.

7. Alignment and Testing: Perform a physical alignment of the LHG and SXT devices to establish a stable wireless link. Use signal strength and quality indicators in the MikroTik RouterOS interface to optimize the alignment. Conduct a thorough performance test to verify the stability and speed of the P2P connection.

8. Monitoring and Troubleshooting: Regularly monitor the wireless link performance using MikroTik's monitoring tools. Address any issues or performance degradation that may arise by adjusting alignment, frequency, or security settings.

By following this step-by-step guide, you can successfully configure a reliable and efficient P2P connection between the MikroTik Mantabox 19s, LHG, and SXT devices. This wireless link enables seamless communication and data transmission between your network endpoints. Enjoy the benefits of a robust and high-performance wireless network!